Playing With Isometric Projection in Inkscape to Make a Minecraft Scene

Inkscape has a really neat grid feature to make isometric designs very easy to accomplish. It’s called an axonometric grid, and we’re going to use it to create a Minecraft inspired isometric design. This tutorial will focus on creating four different isometric blocks that can then be placed to create a scene.

1. Set Up the Document

Step 1

Let’s go to File > Document Properties to set our page size to 970 x 1000 pixels.

Step 2

Now click the Grids tab and create an Axonometric grid. Refer to the image below for the settings – make sure everything on this is the same as yours or we might run into some issues. I’ve also changed the grid line colors to my liking, which may make things easier for you as well.

Step 3

Finally, set the snapping options how I have it shown below. This will make working with grids much easier. At this point, you can see the axonometric grid (it’s pretty neat). I’ve outlined the major grid lines below into the shape of a 3D cube, which will be the basis of this entire tutorial. Let’s begin!

2. Create a Dirt Block

Step 1

Grab that Pen tool, because that will pretty much be the only tool you’ll be using. As nodes will be snapping as you draw, create a 3D cube outline (or hexagon) on the major grid lines. Get rid of the Stroke and give it a brown Fill.

Note: You may be wondering why I’m using a solid shape for a 3D cube instead of piecing together the three separate sides. Well, whenever I use the axonometric grid, nothing ever seems to fit pixel perfect (perhaps on the account of 30 degree angels and the inability to get numbers without decimals). With this, the outcome is always white lines where all of the sides meet up. By doing one solid shape as a basis for the cube, this at least removes the white lines.

Step 2

We’re going to start adding some detail to our dirt block. When you zoom in, you’ll see the smaller grid lines appear – this will be the size of each of our detail colors, so go ahead and draw four of those as shown below. Along with that, give them four different shades of brown as well.

Step 3

Now this is the tedious part. Just start copy and pasting each of the little squares individually to get that Minecraft-type texture. Snapping to bounding box corners will snap these things into place as long as you move them by grabbing the top left or bottom right corners. You can even search some of the actual Minecraft blocks and use them as a reference. Of course, you can always just place them exactly how I have them below. Hotkeys for copy and paste will be your best friend for this one.

While this is tedious, it’s super easy and only takes a couple minutes.

Step 4

With the Selection tool, just select all of the block you’ve just placed. Copy, paste, and click again to bring up the Skewing handles. Hold control and drag this handle up two notches, which will make this perfectly straight.

Step 5

Let go of the skewing handle, but then grab it again. Then do the exact same thing – while holding control, drag it up two more notches. This will give you the texture at the correct angle. If you skew it only once, the angle won’t be right, so make sure you do it two separate times.

Step 6

As you can see, the angle is indeed correct and you can now position it into place. Again, bounding box corner snapping should do the trick, just make sure you grab the selection by a corner.

Step 6

For some quick shading, grab the Pen tool and draw a square over the entire right side. Remove the Stroke and give it a Fill of black. Then, set the Opacity of this shape to 25%. That should do the trick!

Step 7

It’s time for the top details now. Just copy and paste that details group again and use the rotating handles while holding control to fit the top side of the cube.

Step 8

To position this one, you’ll probably want to set Snap from and to midpoints from the snapping menu. Bounding box corners would be pretty useless here.

Step 9

To keep the shaded look going, let’s draw a square for the top side of the cube. Give this one a light brown Fill and no Stroke again.

Step 10

Then set the Opacity to 25%. At this point, you’ll probably want to select the whole block and group it.

Looks pretty good, right?

3. Create a Grass Block

Step 1

Okay, this one will be easy. Just copy and paste your dirt block as we’ll using this for majority of the grass block. Then, using the Pen tool as usual, draw an entire shape in which to resemble the grassy top. Again, we’re doing it as one shape (instead of three separate ones) to avoid brown lines from coming through.

Step 2

Remove the stroke, and Fill it with grassy green!

Step 3

We’ll be using two shades of green for the sides here. Go ahead and draw those up.

Step 4

Now go ahead and start copying and pasting away! You don’t need too much detail here, but you can also place a few below the grass line to give it a more “grassy” texture.

Step 5

Just like before, repeat for the other side. Copy and paste your details and do that double skew maneuver to fit the right angle. Then go ahead and let that snap into place.

Step 6

After your details are in place, we’re going to draw that black shape on the right side of the block again for some quick shading. That was just a black Fill, no stroke, Opacity 25%.

Step 7

It’s time for the top side of our grass block. Draw a shape over the top side and give it a brighter green Fill.

Step 8

For the top side, we’re going to use four more different shades of green. Go ahead and draw these up.

Step 9

Time for the copy and pasting spree! For this particular top side angle, make sure that Snap to midpoints is enabled in the snapping menu. Again, you can reference to an actual Minecraft grass block, or just randomly place these squares.

Two blocks down, two to go!

4. Create a Tree Block

Step 1

For the tree block, let’s just start from scratch. Draw the cube outline (just like we did with the dirt block) and give it a dark brown Fill, no stroke.

Step 2

Let’s draw a couple colors for our tree texture.

Step 3

For the tree block, it may be easier to just use the Pen tool to draw the texture by hand (instead of placing the little squares) as we want the tree to streak up and down. Then of course, use those two brown colors to fill these in.

Step 4

After we’re all colored up, it’s time to copy our texture and skew for the other side. Remember, hold control and drag the skew handle up two notches, then let go. Then, repeat. This will yield the correct angle.

Step 5

After placing that texture, it’s time for the usual shading. Draw over the right side of the cube with a black shape and set the Opacity to 25%.

Step 6

For the top side, draw a light brown shape to cover the top of our cube.

Step 7

Now for the tree texture, just keep drawing shapes one isometric block smaller to the inside. A nice light brown should do the trick.

Step 8

Continue this pattern with a slightly darker brown.

Keep this going until you have something similar to below.

That finishes the wood block. Here’s our three so far!

5. Create a Leaf Block

Step 1

This one is fairly simple. Since this will be a transparent block, we don’t need to start with a base. Just draw up the three green colors as shown below.

Step 2

And place away! Make sure to leave a sufficient amount of open space to make it look nice and leafy.

Step 3

Once you’ve finished one side, go ahead and copy, paste, and double skew for the right side of the leaf block. Then let that snap into place. Keep that side selected for the next step!

Step 4

For shading, we can’t simply slap a transparent black shape over it – it would look terrible with all of the white space. With the right side still selected, head up to Extensions > Color > Less Light. Run this extension twice for the proper amount of shading.

What this Extension does is darken all of the selected colors evenly, which works great in this scenario.

Step 5

Now it’s time for the top of our leaf block. Copy and paste another slice of leaf texture and hold-Control while using the rotating handles to angle this one correctly. Keep this one selected again!

Step 6

This time for shading, we want a brighter top side, so head to Extensions > Color > More Light. Again, run this extension twice.

Step 7

After snapping the top of the leaf block into place, we will have all four of our blocks finished!

6. Build a World

Step 1

Time for the fun part! First, let’s zoom out so we can see our canvas (it’s less overwhelming this way also). Make sure Snap to midpoint is enables for placing blocks. Pretty much at this point, you can place blocks however you’d like. You just copy and paste the blocks we’ve created and let them snap into place.

Also, since we’re working with fake 3D on a 2D plane, you’ll quickly find that depth becomes an issue. The Page Up, Page Down, Home, and End keys will be your friend in proper positioning.

All new pasted blocks are set in front of everything by default, so working from back-to-front would be optimal. Obviously, this is tricky to do, so just keep your hand on those hotkeys.

Step 2

Here’s my finished dirt and grass blocks placement. Remember that the grass blocks go on top of the dirt blocks!

Step 3

Let’s build a tree! Just place those tree blocks about three or four high, then place some leaf blocks around it. Remember, Page Up and Page Down for proper depth placement will make this much easier.

Step 4

Here’s my finished world. This should give you a pretty good idea on how the construction works.

Step 5

Now it’s time for a little extra detail in the shading. For this, we can just use the Pen tool to draw shadows (black Fill with 25% Opacity). For mine, I have the shadow angle completely to the right. Look at the image below for a reference. They don’t have to be 100% accurate, but just enough to add a little more depth to the entire scene.

Step 6

Here’s my completed shading. You might notice I ended up doing a linear gradient for the tree shadow.

Step 7

Now, you can finish this up just by putting some sort of blue sky background on it. Looks great, right?

Step 8

I kept playing around with things and found that if I exported the scene with a transparent background, I could import a few of them back in and adjust the sizes, blurs, and flip them horizontally to make a neat blurred background.

And We’re Done!

A pretty lengthy and slightly tedious tutorial led to an awesome isometric projection design in Inkscape. Not only that, but it was also a ton of fun coming up with a random world out of building blocks! So go ahead and play around with this and build a neat Minecraft type scene. Thanks for reading!

Image may be NSFW.
Clik here to view.

1. Set Up the Document

Step 1

Step 2

Step 3

2. Create a Dirt Block

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 6

Step 7

Step 8

Step 9

Step 10

3. Create a Grass Block

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

4. Create a Tree Block

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

5. Create a Leaf Block

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

6. Build a World

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

And We’re Done!

Trending Articles