Clik here to view.
In the following steps you will learn how to create a layered paper art text effect in Adobe Illustrator. For starters, you will learn how to set up a simple grid and how to create a pretty simple background. Using a free font and basic vector shape building techniques, you will learn how to create a set of compound paths.
Moving on, you will learn how to create an inner shadow effect using several Drop Shadow effects and some opacity masks. Finally, you'll stylize your compound paths, and you'll learn how to add a subtle texture for your final design.
For more inspiration on how to adjust or improve your final text effect, you can find plenty of resources at GraphicRiver.
1. How to Create a New Document and Set Up a Grid
Hit Control-N to create a new document. Select Pixels from the Units drop-down menu, enter 850 in the width and height boxes, and then click that More Settings button. Select RGB for the Color Mode, set the Raster Effects to Screen (72 ppi), and then click Create Document.
Enable the Grid (View > Show Grid) and the Snap to Grid (View > Snap to Grid). You will need a grid every 5 px, so simply go to Edit > Preferences > Guides > Grid, enter 5 in the Gridline every box and 1 in the Subdivisions box. Try not to get discouraged by all that grid—it will make your work easier, and keep in mind that you can easily enable or disable it using the Control-" keyboard shortcut.
You can learn more about Illustrator's grid system in this short tutorial from Andrei Stefan: Understanding Adobe Illustrator's Grid System.
You should also open the Info panel (Window > Info) for a live preview with the size and position of your shapes. Don't forget to set the unit of measurement to pixels from Edit > Preferences > Units. All these options will significantly increase your work speed.
Clik here to view.
2. How to Create the Background and Add Some Text
Step 1
Pick the Rectangle Tool (M) and focus on your Toolbar. Remove the color from the stroke and then select the fill and set its color to R=140 G=198 B=63. Move to your artboard, create an 860 px square, and make sure that it covers your entire artboard.
Clik here to view.
Step 2
Pick the Type Tool (T) and open the Character panel (Window > Type > Character). Select the Comical Cartoon font, and set the size to 130 px and the leading to 220 px. Simply click on your artboard, add your piece of text, and set the color to R=0 G=113 B=188.
Clik here to view.
3. How to Create the Main Compound Paths
Step 1
Make sure that your text is still selected and go to Type > Create Outlines (Shift-Control-O). Ungroup (Shift-Control-G) the resulting group of shapes and then go to Object > Compound Path > Make (Control-8) to turn your blue shapes into a compound path.
Be sure that your compound path is selected and go to Object > Path > Offset Path. Enter a -10 px Offset and then click that OK button. Select the resulting compound path and simply replace the existing fill color with R=255 G=200 B=0.
Clik here to view.
Step 2
Select your yellow compound path and go to Object > Path > Offset Path. Enter a -10 px Offset and then click OK. Select the resulting compound path and simply replace the existing fill color with R=240 G=30 B=40.
Clik here to view.
Step 3
Select all three compound paths and go to Effect > Distort & Transform > Roughen. Enter the attributes shown in the following image, click the OK button, and then go to Object > Expand Appearance.
Clik here to view.
Step 4
Select your red compound path and go to Object > Path > Offset Path. Enter a -10 px Offset and click OK. Select the newly made compound path and simply replace the existing fill color with R=255 G=123 B=155.
Clik here to view.
4. How to Add the Inner Shadows
Step 1
Select your blue compound path along with the green rectangle, and add copies in front (Control-C > Control-F). Bring these two copies in front (Shift-Control-]) and then click the Minus Front button from the Pathfinder panel (Window > Pathfinder).
Turn your resulting group of shapes into a compound path (Control-8), set the fill color to R=140 G=198 B=63, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the left window (in the following image), click the OK button, and then go again to Effect > Stylize > Drop Shadow. Enter the attributes shown in the right window and then click that OK button.
Clik here to view.
Step 2
Make a new copy of your blue compound path (Control-C > Control-F), bring it to front (Shift-Control-]), and replace the existing fill color with white (R=255 G=255 B=255).
Select your white compound path along with the one made in the previous step (the one with the Drop Shadow effects), open the Transparency panel (Window > Transparency), and click that Make Mask button.
Clik here to view.
Step 3
Select your yellow compound path along with the green rectangle and add copies in front (Control-C > Control-F). Bring these two copies to front (Shift-Control-]) and then click the Minus Front button from the Pathfinder panel.
Turn your resulting group of shapes into a compound path (Control-8), set the fill color to R=57 G=181 B=74, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the left window, click the OK button, and then go again to Effect > Stylize > Drop Shadow. Enter the attributes shown in the right window and then click that OK button.
Clik here to view.
Step 4
Make a new copy of your yellow compound path (Control-C > Control-F), bring it to front (Shift-Control-]), and replace the existing fill color with white.
Select your white compound path along with the one made in the previous step, go to the Transparency panel, and click that Make Mask button.
Clik here to view.
Step 5
Select your red compound path along with the green rectangle and add copies in front (Control-C > Control-F). Bring these two copies to front (Shift-Control-]) and then click the Minus Front button from the Pathfinder panel.
Turn your resulting group of shapes into a compound path (Control-8), set the fill color to R=0 G=146 B=69, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the left window, click the OK button, and then go again to Effect > Stylize > Drop Shadow. Enter the attributes shown in the right window and then click that OK button.
Clik here to view.
Step 6
Make a new copy of your red compound path (Control-C > Control-F), bring it to front (Shift-Control-]), and replace the existing fill color with white.
Select your white compound path along with the one made in the previous step, go to the Transparency panel, and click that Make Mask button.
Clik here to view.
Step 7
Select your pink compound path along with the green rectangle, and add copies in front (Control-C > Control-F). Bring these two copies to front (Shift-Control-]), and then click the Minus Front button from the Pathfinder panel.
Turn your resulting group of shapes into a compound path (Control-8), set the fill color to R=0 G=104 B=55, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the left window, click the OK button, and then go again to Effect > Stylize > Drop Shadow. Enter the attributes shown in the right window and then click that OK button.
Clik here to view.
Step 8
Make a new copy of your pink compound path (Control-C > Control-F), bring it to front (Shift-Control-]), and replace the existing fill color with white.
Select this white compound path along with the one made in the previous step, go to the Transparency panel, and click that Make Mask button.
Clik here to view.
5. How to Stylize Your Compound Paths
Step 1
Select your blue compound path and focus on the Appearance panel (Window > Appearance). Select the fill, replace the existing color with R=117 G=181 B=32, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the following image, click the OK button, and then go to Effect > Stylize > Outer Glow. Enter the attributes shown below and then click that OK button.
Clik here to view.
Step 2
Select your yellow compound path and focus on the Appearance panel. Select the fill, replace the existing color with R=57 G=181 B=74, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the following image and then click that OK button.
Clik here to view.
Step 3
Select your red compound path and focus on the Appearance panel. Select the fill, replace the existing color with R=0 G=146 B=69, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the following image and then click OK.
Clik here to view.
Step 4
Select your pink compound path and focus on the Appearance panel. Select the fill, replace the existing color with R=0 G=104 B=5, and then go to Effect > Stylize > Drop Shadow. Enter the attributes shown in the following image and then click that OK button.
Clik here to view.
Step 5
Make sure that your darker compound path is still selected and keep focusing on the Appearance panel. Add a second fill using the Add New Fill button, and then select it. Set the color to R=0 G=84 B=35, and then go to Effect > Path > Offset Path. Enter a -7 px Offset and then click that OK button.
Clik here to view.
6. How to Add Shading and a Subtle Texture
Step 1
Select your green square, make a copy in front (Control-C > Control-F), and bring it to front (Shift-Control-]).
Make sure that this new shape stays selected and focus on the Appearance panel. Select the fill, change its Blending Mode to Soft Light, and then replace the existing color with the radial gradient shown in the following image. Keep in mind that the yellow zero from the Gradient panel (Window > Gradient) stands for Opacity percentage.
Clik here to view.
Step 2
Make sure that the square added in the previous step is still selected, focus on the Appearance panel, and add a second fill using that same Add New Fill button.
Select this new fill and set the color to black (R=0 G=0 B=0). Lower its Opacity to 10%, change the Blending Mode to Soft Light, and then go to Effect > Artistic > Film Grain. Enter the attributes shown in the following image and then click that OK button.
Clik here to view.
Congratulations! You're Done!
Here's how it should look. I hope you've enjoyed this tutorial and can apply these techniques in your future projects.
Feel free to adjust the final design and make it your own. You can find some great sources of inspiration at GraphicRiver, with interesting solutions to improve your design.
Clik here to view.
Clik here to view.
Image may be NSFW.Clik here to view.
Clik here to view.